Our Shop

IK Multimedia IP-IRIG-STOMPIO-IN iRig Stomp I/O (IK Multimedia IP-IRIG-STOMPIO-IN)
247.632
207101.jpg

IK Multimedia IP-IRIG-STOMPIO-IN iRig Stomp I/O (IK Multimedia IP-IRIG-STOMPIO-IN)

SKU C207101
In stock
IP-IRIG-STOMPIO-IN Comes with full manufacturer warranty
IK Multimedia IP-IRIG-STOMPIO-IN iRig Stomp I/O (IK Multimedia IP-IRIG-STOMPIO-IN)

Your purchase is fully protected against any Transit Damage or if you receive incorrect/faulty item.

£247.63
- +

Get discounted express delivery @2.99. Use T012S code at the checkout.

Technical Details

IK Multimedia iRig Stomp I/O | Rugged pedalboard controller

  • Four onboard switches, expression pedal with optical switch
  • 96kHz/24-bit built-in high-quality audio interface with input gain and volume control
  • Hi-Z/Mic/Line Neutrik® combo input, balanced stereo, and headphone output
  • Class A preamp with +48V phantom power for condenser microphones
  • In/out LED bar VU-Meters
  • MIDI in/out with two additional 1/4" switch/pedal controller inputs


iRig Stomp I/O is a brand new type of USB pedalboard controller that integrates a professional, high-resolution, MFi certified audio interface with MIDI input/output for iPhone, iPad, Mac, and PC.

It comes bundled with state-of-the-art guitar, vocal processing, and recording software for flexibility and usability, both live and in the studio.

Sturdy and robust, yet easily transportable, iRig Stomp I/O features four onboard metal stomp switches plus an expression pedal with a switch, all with LED indicators.

To further extend its control possibilities, you can connect up to 2 additional switches or pedals. The MIDI IN/OUT ports make it possible to seamlessly control external processors when iRig Stomp I/O is used as a stand-alone MIDI foot controller, without any device or computer connected to it.

The Neutrik 1/4" XLR combo jack accepts instruments and microphones including condenser mics with switchable 48V phantom power. The balanced stereo output connects to an external amp, mixer or PA, and a 1/4" stereo headphone output is available for silent monitoring. The input gain and volume output knobs are easily accessible on the front panel, each with its dedicated LED VU-Meter indicator, for the quick-and-easy setting of levels.

iRig Stomp I/O also takes the concept of versatility to a whole new level, by combining a smart, hi-tech hardware system with an incredible collection of complete, professional software and apps worth over $/€800.

Specifications

iRig Stomp I/O Specifications

Common

  • Conversion: 24-bit A/D, 24-bit D/A
  • Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
  • Power: USB bus powered (when used with a computer) or DC IN
  • Device Connection: USB B-Type and Mini-DIN
  • Enclosure: metal sheet

Microphone Input

  • Connector: balanced female 3-pin XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
  • Microphone Input Level: from 6 mVpp to 1.4 Vpp
  • Microphone Input Impedance: 3.2 kOhms
  • Gain Range: 46 dB
  • Phantom Power: +48V ± 4V
  • Frequency Response: 20 Hz – 20kHz +/-1.5dB
  • Input Noise: -100 dB RMS

Instrument Input

  • Connector: unbalanced, Hi-Z, TS 1/4" Jack. Tip: signal / Shield: ground
  • Instrument Input Level: from 30mVpp to 6.9Vpp
  • Instrument Input Impedance: 1MOhms
  • Gain Range: approx 27dB
  • Frequency response: 20 Hz – 20kHz +/-1.5dB
  • Input Noise: -100 dB RMS

Stereo Headphone Output

  • Connector: 1/4" TRS Jack. Tip: right / Ring: left / Shield: ground
  • Headphone Level control: potentiometer
  • Headphone Output Power: 100mW into 50Ohms

Stereo Line Output

  • Connector: 2x balanced female 1/4" TRS Jack. Tip: hot / Ring: cold / Shield: ground
  • Maximum Output Level: +13 dBu into 600 Ohms balanced load
  • Frequency Response: from 10 Hz to 21 kHz (+/- 0.2dB)
  • Output Dynamic Range: 102 dB(A)
  • Output Impedance: 150 Ohms balanced
  • Floating Balanced Outputs

MIDI Input/Output

  • Connector: 2x 5-pin DIN

Connections and Controls

Top Panel

  • Four metal foot-switches with one indication LED each, dual color
  • Two analog potentiometers for Input GAIN and output VOLUME
  • "Stomp MODE" LED
  • "Phantom 48V" LED
  • "PEDAL" LED
  • 4 segments mono input level meter (peak)
  • 4 segments device output meter (peak)
  • Continuous pedal (expression pedal) with virtual switch at the top of its travel

Rear Panel

  • Neutrik Combo socket for MIC input and Instrument input (auto selecting)
  • +48V phantom power switch
  • 1/4" headphones output
  • 2 x 1/4" TRS Balanced floating line outputs
  • MIDI I/O 5-pin DIN connectors
  • 2 x 1/4" TRS External controllers sockets
  • B-Type USB socket for connecting a computer (Mac/PC)
  • Mini-DIN "iOS" connector for connecting an iOS device
  • Barrel DC-in socket for powering up the Stomp I/O and charging the iOS device at the same time

Box Contents

  • iRig Stomp I/O
  • Lightning to Mini-DIN connection cable (60cm/23.62")
  • USB A-Type to USB B-Type connection cable (2.5m/8.2ft)
  • DC power supply


*Box quantity refers to the number of units contained in this product's outer packaging. It does not refer to the number of products purchased for the quoted unit price unless otherwise stated.

More Information
More Information
SKU C207101
Model No IP-IRIG-STOMPIO-IN
Weight 1.0000
Brand IK MULTIMEDIA
Reviews

Write Your Own Review

You're reviewing: IK Multimedia IP-IRIG-STOMPIO-IN iRig Stomp I/O (IK Multimedia IP-IRIG-STOMPIO-IN)

DELIVERY & RETURNS

Custom static block for product detail
 
FREE SHIPPING

Free shipping on all orders above £20

 
SUPPORT 24/7

Contact us 24 hours a day, 7 days a week

 
30 DAYS RETURN

Simply return it within 30 days for an exchange.

 
100% PAYMENT SECURE

We ensure secure payment with Paypal